ADS 1

Adaro Energy Jobs: 6 Positions


Adaro Energy Jobs: 6 PositionsWe are an Indonesian energy group that focuses on integrated coal mining through subsidiaries. Our principal location is at Tabalong district in South Kalimantan, where our subsidiary PT Adaro Indonesia operates the largest single-site coal mine in the southern hemisphere. We operate under a first-generation CCA (coal co-operation agreement) with the Indonesian Government valid until 2022.

From our South Kalimantan mine’s three pits we produce one of the world’s cleanest coals, trademarked Envirocoal. It is a sub-bituminous, moderate calorific value coal producing ultra-low sulphur, ash and NOx emissions.

We are proud of our record of continuous growth over the two decades that we have been mining in Kalimantan. In 2014 we delivered 56.2 million tonnes of coal, and in 2015 we plan to produce between 54 million and 56 million tonnes.

Our coal is primarily sold to power generation providers, and we sell an average of about 25% of our coal to customers domestically in Indonesia and 75% to overseas customers, predominantly in Asia.


Unit Controller

Work Location                          : Kalimantan Selatan
Available Position                    : 2
Employment Status                  : Permanent
Minimum Year of Experience : 3 Year(s)
Closing Date                            : 21 September 2020

Job Responsibilities:

Responsible to control, monitoring, and operate the power plant operational (Boiler, Turbine, BOP, and auxiliary plant) in order to reach the target and run smoothly and safe.

- To control and monitor the DCS operator in power plant operational (boiler, turbine, BOP, and auxiliary power plant) by DCS control based on approved procedure to reach the production target following health and safety principles.
- To provide the directions of monitoring and technical actions to operational machine to DCS Operator Unit 1 and 2 and Field Operator based on DCS observation result to monitor panel as well as analyze the abnormality to get the decision which will be doing and also to coordinate with Shift Supervisor to have follow up action in a timely manner.
- To monitor and coordinate all the activities which required for Start-Up and Shut Down of the Power Plant equipment to support the continuity of Power Plant operations.
- To identify the dangerous potential during the operational Power Plant process and conduct the action based on settled up procedures as well as to report abnormality in the report to be evaluated and followed up accurately and timely manner.
- To respond and control the emergency situation, emergency response such as fire and oil leaks to ensure the worker's safety, plant, and environment.
- To report the condition, disturbance findings, and the latest update about power plant operations to DCS Officer in Charge in shift in Operator Daily Report in shift / daily log sheets which has been defined for continuity Power Plant operations.
- To coordinate with Maintenance Dept to follow up maintenance requirements findings to support the continuity of Power Plant operations.

Job Requirements:
- Minimum Diploma Degree (D3) graduate majoring in Mechanical or Electrical Engineering
- Have a minimum 3 years of experience as Operator in manufacturing or power plant
- Preferably has broad experience and proven skills in coal-fired power plant operation.
- Good communication skill
- Good command in English both verbal and written
- Willing to be located at Tanjung – Tabalong, South Kalimantan


Mechanic

Work Location                         : Kalimantan Selatan
Available Position                    : 1
Employment Status                  : Contract
Minimum Year of Experience : 3 Year(s)
Closing Date                            : 21 September 2020

Job Responsibilities:

Responsible for completing work within the scope of operations, maintenance and repairing to ensure the operations run smoothly. 

- Monitoring the work on the field and operate the unit pump
- Give briefing at the beginning of each shift 
- Monitoring the availability of Junior Mechanic crew and Excavator Operators
- Ensure that all team working responsibilities in the pump unit are allocated in accordance with OSH planning
- Making progress report of maintenance and repairing activities
- Ensure operational, maintenance and repairing activities carried out in accordance with SOP 

Job Requirements:
- Minimum Senior High School, preferably majoring in Mechanical Engineering 
- Minimum 5 years experience as Mechanic for Heavy Equipment
- Broad experience and proven skills in pump industry will be advantage
- Good communication skill 
- Willing to be located in Tanjung - Tabalong, South Kalimantan


Blasting & Painting Officer

Work Location                         : Kalimantan Selatan
Available Position                    : 1
Employment Status                  : Permanent
Minimum Year of Experience : 2 Year(s)
Closing Date                            : 21 September 2020

Job Responsibilities:

Plan, supervise and ensure the blasting & painting process runs successfully, according to predetermined standards and schedules in order to obtain optimal results and work quality. Conduct JSA and safety briefing for subcontractors regarding to work safety.

Job Requirements:
- Minimum Diploma Degree (D3)
- Minimum 2 years of experience in the same or related position in shipyards or other similar industries
- Able to manage and direct man power to finish project attentively
- Able to give technical solutions to problem in the field
- Familiar with writing blasting & painting reports 
- Willing to be placed in South Kalimantan


Shipyard Production Section Head

Work Location                          : Kalimantan Selatan
Available Position                    : 1
Employment Status                  : Permanent
Minimum Year of Experience : 2 Year(s)
Closing Date                            : 21 September 2020

Job Responsibilities:

Plan, coordinate, and control all ship repair activities and required process supporting facilities, with the aim that the repairs can be carried out in accordance with the planned targets and meet standards.

Job Requirements:
- Minimum Diploma Degree (D3) of Naval Architect, Ocean Engineering, & Marine Engineering
- Minimum 2 years of experience in the same or related position in shipyards or other similar industries
- Able to plan, coordinate and control all production activities in ship repairs
- Familiar with writing reports
- Willing to be placed in South Kalimantan


Shipyard Quality Control Section Head

Work Location                         : Kalimantan Selatan
Available Position                    : 1
Employment Status                  : Permanent
Minimum Year of Experience : 2 Year(s)
Closing Date                            : 21 September 2020

Job Responsibilities:

Coordinate inspections and provide technical approval for results of repairs/production process of the ship which has met the applicable standards in order that the repaired ship does not have a defect due to repairs and passes the certification process in accordance with applicable standards.

Job Requirements:
- Minimum Bachelor Degree (S1) of Naval Architecture
- Minimum 2 years of experience in the same or related position in shipyards or other similar industries
- Able to handle field inspection requests, knowledge of quality standards in ship repairing and able to make requested inspection reports by the class surveyor and the shipowner
- Able to set up QC inspection procedure
- Understanding about welding inspection (can be supported by certificate)
- Proven communication, leadership, and managerial skills.
- Willing to be placed in South Kalimantan


Maintenance I&C Supervisor

Work Location                         : Kalimantan Selatan
Available Position                    : 1
Employment Status                         : Permanent
Minimum Year of Experience : 3 Year(s)
Closing Date                            : 21 September 2020

Job Responsibilities:

Supervise the Power Plant Maintenance on I&C equipment in accordance with the company plan to support the achievement of the company target with the implementation of the working procedure. 

- Make a plan for manpower, material, spare part, and time schedule of daily routine and weekly maintenance activities to support the continuity of Power Plant Operation. 
- Coordinate the maintenance Department in accordance with I&C scope to ensure the maintenance target are achieved.
- Review procedures and work instructions, work plans, obstacles, and other potential hazards that found when work is done to improve the quality of work that is done to improve the quality of work that is effective, efficient, and safe.
- Review and provide recommendations on material and spare parts requirements to improve the performance/reliability / accuracy of instrument and control equipment.
- Analyze, coordinate and report the troubleshooting for complex problems of instrument and control equipment, so that problem solving is carried out precisely and quickly.
- Complete the instrument and control system maintenance data on the Computerized Maintenance Management System (CMMS) to make integrated maintenance of instrument and control activities.
- Conduct the toolbox meeting with the technician for review maintenance activities, pending jobs, safety issues, material use, tools, and spare parts is done in a timely manner.
- Ensure the I&C Maintenance plan, budget, SOP, MI and HIRA are well understand by Technician to minimize the potential danger and the damage/loss.
- Conduct inspection, monitoring and revalidation for Permit-To-Work on I&C maintenance activities to ensure all required working documents and action is done in accordance with applicable company procedure.  

Job Requirements:
- Minimum Diploma Degree (D3) graduate majoring in Electrical Engineering
- Minimum 3 (three) years of experience as I&C Maintenance Supervisor position in the power plant industry 
- Good Communication and Leadership Skill
- Broad experience and proven skills in coal-fired power plant operation & maintenance will be an advantage.
- Good command in English both verbal and written 
- Willing to be based in Tanjung - Tabalong, South Kalimantan



Those who are interested please apply to link below. Beware recruitment scams using Adaro Energy or subsidiary names.

To prospective job applicants of Adaro Group, please be aware that recruitment fraud has been known to be carried out using PT Adaro Energy, Tbk and subsidiaries name in which applicants are contacted asked to transfer money to pay for recruitment ticket.

Adaro Group has never asked our prospective job applicants to transfer some money for recruitment process.


Apply now

Belum ada Komentar untuk "Adaro Energy Jobs: 6 Positions"

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel